威海浩威户外用品有限公司

Why do we like rubber boats it, why do we choose rubber boats it, that of course because of its hull light, easy to install, flexible to carry and many other characteristics to make us so love it. At the same time because of these characteristics of the rubber boat also brings its flaws, unlike large boats in the water solid driving, its hull light and flexible in the wind and waves or not up to the ideal, in driving is necessary for us to know some safety code, so that we can ensure safety. This article tells you how to use the rubber boat is safe, what are the specific matters to pay attention to.

First, in every time we enter the water to play in the front, should first put on a life jacket, each water has unknown dangers, such as undercurrents, currents, rapids, etc. These can make our safety is threatened, not that we can swim to overcome these, we are limited physical strength, if trapped for a long time it is easy to exhaust the physical strength, such as physical exhaustion, even if you are a swimming instructor are not able to swim out. So put on a life jacket, personnel in the water our safety will also be protected (to protect the role of things), life jackets have enough buoyancy to hold our bodies, always keep the value of the head exposed to the water.

Second, before boarding the boat should inspect whether the tool bag, repair kit and other emergency items have been placed on the boat to avoid emergency (critical) situations can be used at any time. At the same time, check whether the oars have been fixed in the hull, the oars are also very important, do not think that the installation of the outboard will not use the oars, the machine is prone to failure, in the event of failure can not start when you can also use the oars rowing. Manual inflatable pump is also best placed on the boat, just in case.

Third, after we drink alcohol must not travel again, rubber boat hull light, dizziness after drinking when standing unstable, it is easy to fall into the water danger, if you see someone drinking alcohol also travel by boat, should be promptly stopped, while they should also restrain themselves from drinking alcohol travel. In addition to drinking, after taking stimulant drugs should not take the boat.

Fourth, some friends may use rubber boats to carry goods for convenience, which is possible, but remember to place the goods evenly on the boat to ensure the balance of the hull. Rubber boat manufacturing kayak materials are: wood plywood, plywood, aluminum, fiberglass, plastic, etc. Internationally, there are uniform regulations on the length, width and minimum weight of race boats to facilitate fair competition. Within this regulation, the manufacturer plays its design level to make the athletes get good results in the race as much as possible. Of course, winning or not, mainly comes from the flexibility of the athletes' skills and strength. In our ride too many people should also be distributed in a balanced manner. Such as just one or two people riding carrying lighter, the driver should pay attention not to the outboard engine to violently increase the throttle, sudden acceleration, this operation will bring a certain degree of danger and problematic impact.

Fifth, when configuring the outboard to the rubber boat do not ignore the hull and outboard coordination because of the pursuit of speed, the size of the installed outboard horsepower should also be configured according to the size of the hull, the specific can consult the merchant at the time of purchase.

Six, in the summer, very many waters will have swimmers, in our high-speed rubber boat, should always pay attention to these swimmers, or easy to hit them, it is best not to drive in such waters, generally swimmers only swim close to the shore, we can drive inside, pay more attention to the line when docking. Rubber boat manufacturing kayak materials are: wooden plywood, plywood, aluminum, fiberglass, plastic, etc. There are unified regulations internationally on the length, width and minimum weight of race boats to facilitate fair competition. Within this regulation, the manufacturer plays its design level to make the athletes get good results in the race as much as possible. Of course, winning or not, mainly comes from the flexibility of the athletes' skills and strength. There is also the fact that we are still in the water, the propeller of the outboard is still running, must pay attention not to let people close.

Seven, when driving should be long soon to observe the use of fuel, especially the built-in fuel tank is loaded with less fuel, do not run out are not aware of, if the driving waters are far, with the oars do not know when to row back to the shore. If necessary, you can prepare a bottle of fuel on your body, but be sure to pay attention to the open fire.

Eight, said above, each water has unknown dangers, so we should understand the hydrological situation of the water before driving to unfamiliar waters, it is best not to enter the water in unknown circumstances, before traveling should also inform the people around you know the information, such as the time and place, otherwise when danger occurs, others do not know where you are. According to the Guinness Book of World Records, the history of inflatable boats can be traced back to as far as 880 BC, when King II of the Assyrians ordered his troops to constantly inflate the skins of animals to make them swell so that they could pass through the rivers! In ancient China, during the Song and Ming dynasties, people also used sealed, inflated animal skins to cross rivers. Rubber boats originated from the Eskimos in Greenland, North America, who used animal skins wrapped in a wooden frame to make animal skin boats. Kayak rudder, when the race, athletes sitting in the boat, facing forward, holding two heads with paddle blade paddle on both sides of the boat in turn, relying on the foot to manipulate the rudder to control the course. There are single boat, double boat, four-person boat and obstacle slalom project.